ĐẶT HÀNG LIÊN HỆ 02439784346 VÀ ZALO 0989152928, KHÔNG SHIP COD KHU VỰC NGOÀI HÀ NỘI.THANK

Danh mục sản phẩm

Hỗ trợ trực tuyến

  • HOMETECH2 : 0439784346

  • HOMETECH1 : 0439784346

videos

  • + Nhà thông minh 2
  • + Giải pháp nhà thông minh 1
  • + Nhà thông minh của HP
  • + Đèn cảm ứng chống trộm

Tin tức nổi bật

Đối tác khách hàng

Tên sản phẩm: Bộ chia tín hiệu hồng ngoại 2 vào 4 ra

Mã sản phẩm: Bộ chia tín hiệu hồng ngoại 2 vào 4 ra

Giá cũ :

Giá bán : 800.000 VNÐ


ĐẠI LÝ ĐỘC QUYỀN TẠI VIỆT NAM THIẾT BỊ KHUẾC ĐẠI TIN HIỆU HỒNG NGOẠI

Sản phẩm nhập khẩu Singapore

 

Remote Control IR Repeater/ IR Extender with 2 Receivers & 4 Emitters ( for 4 AV Devices & 2 Displays ) with DC12V adaptor BD204

 

IR REMOTE CONTROL REPEATER/ EXTENDER BD204

 

With 2 IR Receiver, one IR receiver can be placed in the hall and the other receiver can be placed in the room to achieve the sharing of  same AV Equipments.

 

Remote Control from the room is achievable if the AV cable from TVs ( Room ) is connected to the Player/ Appliance ( Hall ). ( I.e Sharing a Player/ Appliances to watch in different rooms )


 

 

 

 

 

 

GENERAL

 

Remote Control Infrared Extender/ Infrared Repeater is a product which amplifies the IR signal of your appliances. By connecting this repeater to your appliances, you may be able to conceal your appliances such as in your TV console or cabinet. 

There are 3 main parts in this IR Extender/ IR Repeater namely Infrared Emitter ( IR Emitter), Infrared Receiver ( IR Receiver ) & Infrared Transmitter.

The emitter is to be pasted on the IR point of your appliances while the receiver is placed in a position of which it communicate signal with your remote control. The IR transmitter box process signal received from the Receiver and generate signals out to Emitters which in turn to your Players/ Appliances.

 

 

 

 

 

 

 

 

FEATURES

 

High Sensitivity - Real time transmission without any delay with its high sensitivity sensor. 
CFL Friendly - This unit can be installed in an area with compact fluorescent lighting and work in most lighting environments 
Remote Indication light on IR Receiver - Green being power connected while flashing red indicates the signal is being sent. 
Broad bandwidth - With this feature, it is compatible with almost all the electronics appliances in the market with its wide frequency range 
Size - Small & Solid design 
Low Power - 12V DC, 30mA max

 

 

 

 

 

 

 


INSTALLATION

 

IR RECEIVER
( Note: Plasma Displays emit IR frequencies during use and may cause interference. It is advised to distance the IR Receiver from any Plasma TV. Ability to control multiple appliances at various locations up to 10m. ) 

 

Connect IR Receiver to any of the 3.5mm IR ports on the IR Transceiver box. If 2 or more IR receivers are connected, the distance between 2 IR Receivers should not be less than 6 m to avoid interference. ( Only 2 IR Receiver for this model BD204 ) 


(Note : Maximum of 6 IR Receivers can be connected to the 3 Ports of 3.5mm Jack ( on Transceiver ) by using 3.5mm Splitter cable 1 Male to 2 Female. Three 3.5mm Splitter cables connect to transceiver to obtain 6 ports of 3.5mm. ) 

Remote Control from the room is achievable if the AV cable from TVs ( Room ) is connected to the Player/ Appliance ( Hall ). ( I.e Sharing a Player/ Appliances to watch in different rooms ) See Picture.


 

 

 

 

IR EMITTERS 
Insert Emitter cable to any of the Emitter Input Ports on Transceiver box. ( Optional : Maximum of 24 emitters can be connected to the 6 Transceiver Emitter Input Ports, using 4 Emitters head per cable type ) ( 4 Emitters for this model BD204 ) 

 

Stick the emitter near to the IR Point of Player/ Appliances. Only one emitter head is applicable on each Player/ Appliance 

Operate the Remote Control faces the IR Receiver. Keep moving the IR Emitter on Player/ Appliance to achieve best signal transmission. Stick the Emitter to the point which produced the best signal. See Picture.

 

 

 

 

POWER SUPPLY ( 2 Ways of power supply )
BD Series - Direct power using DC 12V/500m OD 5.5mm ID 2.1mm adaptor ( Included) 


BU Series - By connecting the IR Transceiver box to Player/ Appliance via USB cable. Using the power of Player/ Appliance to power up the Transceiver box OR connects the Transceiver to a USB DC 5V adaptor. ( Not included )

 

 

 

 

 

 

 

 

TECHNICAL SPECIFICATION

 

Receiving Frequency Range  : 34 KHZ to 60KHZ 
Emitting Frequency Range : 38 KHZ & 56KHZ 
Receiving Distance : 8 Meter 
Emitting Distance  : 100-200mm 
Power Consumption : 12VDC, 30mA max. 
Dimension : IR Receiver 31 (L) × 17 (W) × 13 (H)mm  IR Emitter 13 (L) × 8 (W) × 5.5 (H)mm 
IR Transceiver Box 90 (L) × 55 (W) × 26 (H) mm 
Cable Length : DC 12V Adaptor cable 0.7m, IR Receiver 1.5m, IR Emitter 3m 

 

Weight : 


IR Receiver 30g X 2
IR Emitter ( Dual heads ) 25g X 2
IR Transceiver Box 140g 
12VDC Adaptor 80g

 

 

 

 

 

 


FREQUENTLY ASKED QUESTIONS & REMEDIES

 

1. HOW TO LOCATE THE IR POINT ON PLAYERS/ APPLIANCES ? 
Move the emitter around the surface of player until a signal is received from the remote control. Once a signal is received, paste the emitter on the particular point on the player.

 


2. REMOTE MUL-FUNCTION AFTER INSTALLATION ? 
Check the battery of the remote control; 
Red light blinks on IR Receiver indicates that signal is being sent from Remote Control to IR Receiver and IR Receiver is in working condition. 
Check the distance between the IR Receiver & Emitter. 
Check if the emitter is pasted on the right position ( IR point of the player )

 

 

3. INSENSITIVITY OF IR RECEIVER ? 
Check if the emitter is pasted on the right position ( IR point of the player ) 
Change to USB 5V adaptor for power supply 
Move the IR Receiver away from the TV as there may be electrons interference from the TV.

 

 

4. WATER MARKS, POWER NOISE AND UNCLEAR PICTURE AFTER INSTALLATION ? 
Noise originated from the connections of TVs, Players. Try cleaning with a dry cloth or with less alcohol. Reinstate power thereafter. 
Network Cable – Please ensure that only quality full copper CAT5E is used so as to regulate better image quality even if the distance is far. Inferior quality of CAT5E will decrease the distance and AV of the display. Connection of the CAT5E head ( RJ45) also affects the quality of the image and current noise. Ensure that CAT5E is fully inserted to the Transmitter/ repeater.

 

 

5. AS LONG AS THE PLAYER/ APPLIANCE IS ON, ANY SUB-TV ( ROOMS ) CAN BE WATCH EVEN IF THE MAIN TV IS OFF . 
Ability to use the Remote Control in the room to control the Player/ Appliance in the hall.

 


6. WHICH REMOTE CONTROL TO USE? 
Use the Remote Control of the respective Players/ Appliances to manipulate the controls.

 

 

 

 

 

 

 

PACKAGES

 

1. IR Transceiver Box ( 1 Piece ) 
2. IR Receiver Cable ( 2 Pieces with 1 Receiver on each cable ) 
3  IR Emitter Cable ( 2 Pieces with 2 Emitters on each cable ) 
4. DC 12V Adaptor ( 1 Piece ) Type of Adaptor pin will be packed according to your requirement.
5. Instruction Manual

Sản phẩm cùng loại:
string(2) "dp"

Chat Live Facebook