ĐẶT HÀNG LIÊN HỆ 02439784346 VÀ ZALO 0989152928 SHIP COD MỌI MIỀN TỔ QUỐC.THANK

Hỗ trợ trực tuyến

  • HOMETECH2 : 02439784346

  • HOMETECH1 : 02439784346

videos

  • + Nhà thông minh 2
  • + Giải pháp nhà thông minh 1
  • + Nhà thông minh của HP
  • + Đèn cảm ứng chống trộm
  • + Hệ thống đơn giản, tiện lợi, dễ sử dụng
  • + Giải pháp tiện lợi được cung cấp bởi Hometech.vn
  • + Hệ thống gọi phục vụ không dây đáng tin cậy

Tin tức nổi bật

Đối tác khách hàng

Tên sản phẩm: Điều khiển từ xa tắt mở camera cctv từ xa , tắt mở nhiều camera không giới hạn khoảng cách

Mã sản phẩm: Điều khiển từ xa tắt mở camera cctv từ xa , tắt mở nhiều camera không giới hạn khoảng cách

Giá cũ :

Giá bán : 0 VNÐ


You are going  to install a security system with video cameras in somewhere in you new house, the door gate, garage, porch, living room, bedrooms. Yes, it is inconvenient for you to hold many remote controllers to turn on or off those video cameras. Or sometimes, you can not find all of controllers when the house is in a mess. At this moment you wonder whether it is possible to wire some video cameras to be controlled by one remote controller or not. We have many kinds of remote transmitters and we consider a set handy electronic gadget can help you. CB series transmitter, Model 0021027(CB-6) is one of those transmitters, which can connect with 6 receivers. It pairs with the receiver, Model 0020360(S1UB-DC12). You can control video cameras with just one remote controller easily.  

It is so easy to install. Look at the wiring picture.

 

 

Wires on the video camera should be connected to the receiver and power supply. From the picture, the red wire from the video camera is connected to B terminal of the receiver and the black wire is connected to negative electrode of the power supply. The positive wire of the power supply is connected to C terminal of the receiver.

The transmitter and receivers should come to the “Toggle Mode”. This means pressing each button controls each video camera on or off separately.

When press button 1, the transmitter is triggered and sends out an RF signal “ON” to the receiver. After the receiver receives the signal, the corresponding video camera is on. When press button 1 again, the transmitter is triggered and sends out an RF signal “OFF” to the receiver. After the receiver receives the signal, the corresponding video camera is off…

It is really a simple and convenient way to control all video cameras from one remote controller.

 

Sản phẩm cùng loại:
string(2) "dp"

Chat Live Facebook